| Technical Specifications: |
| Form Factor |
mini ITX (170x170) |
| CPU |
750Fx (G3) |
| CPU speed |
not specified |
| CPU upgradable |
No |
| CPU socket |
No |
| CPU cooling |
Active (fan) - Temp controlled |
| FSB |
133MHz |
| Memory slots |
2 x DIMM |
| Memory type |
SDRAM |
| Memory specification |
Registered 133 |
| Max memory |
1GB |
| Memory onboard |
Flash Memories |
| Northbridge |
Tundra Tsi-107 |
| Southbridge |
N/A |
| PCI 33 MHz |
2 Slots |
| PCI 66MHz |
0 Slots |
| Graphics onboard |
none |
| Graphics outputs |
N/A |
| Audio onboard |
CMI8738 6 channel 5.1 surround
sound with CDROM, front audio
on headers |
| AGP slots |
0 |
| AGP speed |
n/a |
| IDE controller |
SiL0680 ATA-133 |
| IDE headers |
2 * 40 way |
| I/O expansion |
none |
| Firewire IEEE1394 |
none |
| Ethernet chip |
RTL8110 GB/100/10 |
| USB mode |
2.0 |
| USB ports |
3 back plate + 2 headers |
| PS2 ports |
none |
| Serial ports |
none |
| Parallel port |
none |
| IRDA port |
none |
| Firmware |
PPCBoot + OS4 enabler |
| O/S capability |
LinuxPPC + OS4 |
|
Click on image for enlarged picture
|
This motherboard was built by Amiga users specifically for OS4, and the concept was to produce a simpler board, with fewer
connectors and dependencies, that utilised USB for all I/O connections, as a new lower cost small footprint Power PC
alternative to the A1-Micro. With no onboard graphics, 1 PCI slot is required for a graphics card, although a riser card is
under investigation to provide more slots.
|