Technical Specifications: Form Factor Std ATX (305x244) CPU 750CXe CPU speed 600MHz CPU upgradable No CPU socket No CPU cooling Passive FSB 133MHz Memory slots 2 x DIMM Memory type SDRAM Memory specification Registered 133 Memory maximum 2GB Memory onboard 0 Northbridge Articia 'S' with fix Southbridge VIA 82C686B PCI 33 MHz 4 Slots PCI 66MHz 1 Slot Onboard graphics none Graphics outputs n/a Audio onboard AMR slot AGP sSlots 1 AGP speed 2x IDE controller VIA 686B ATA100 IDE headers 2 x 40 way I/O expansion none Firewire IEEE1394 none Ethernet chip 3COM 820C 10/100 USB mode 1.1 USB ports 2 back plate+2 headers PS2 ports Keyboard + mouse Serial ports 2 x 16650 equiv. Parallel port 1 x EPP/ECP IRDA port On header Firmware PPCBoot + OS4 enabler O/S capability LinuxPPC + OS4

Click on image for enlarged picture

The 600MHz G3-based AmigaOne G3-SE was the first of the motherboards to be released, however after the above information was published, Eyetech announced that due to "not being able to source an AMR card at a sensible price" the initial AmigaOne SE motherboard would not be so equipped. They went on to say that they will be shipped with (small,quiet) cpu fans and modified ATX I/O backplates, presumably to line up with the holes in the case. This means that these Motherboards needed to have a sound card added.

Disclaimer: Amiga Auckland have prepared the above information for the use of its members based on our experiences and as such is subject to revision at any time. Amiga Auckland cannot guarantee any of the information and cannot be held accountable for any issues that may result from using it.